Hyundai Azera: Intake And Exhaust System

Oil Level Gauge & Pipe Repair procedures

Removal and Installation 1. Remove the oil level gauge (A). Tightening torque: 18.6 ~ 22.6N.m (1.9 ~ 2.3kgf.m, 13.7 ~ 16.6lb-ft)     When installing, apply engine oil to t ...

Air Cleaner Components and Components Location

Components 1. Air duct2. Air cleaner lower cover3. Air cleaner element4. Air cleaner upper cover5. Breather hose6. Air in take hose7. Resonator8. Clamp9. Barometric pressure sensor ...

See also:

Water pump Repair procedures
Removal 1. Drain the coolant. (Refer to Cooling System - "Coolant") 2. Remove the drive belt. (Refer to Timing System - "Drive Belt") 3. Remove the water pump pulley (A). 4. Remove ...

Photo Sensor Description and Operation
Description 1. The photo sensor is located at the center of defrost nozzle. 2. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its lig ...

Hood Weatherstrip Repair procedures
Replacement 1. Remove the hood weatherstrip (A). 2. Installation is the reverse of removal. ...