Hyundai Azera: Timing System

Engine Hanger Repair procedures

Removal and Installation [Front engine hanger] 1. Remove the front engine hanger (A) Tightening torque: 44.1 ~ 53.6N.m (4.5 ~ 5.5kgf.m, 32.5 ~ 39.8lb-ft) 2. Install in the reverse ord ...

Drive Belt Components and Components Location

Components 1. Drive belt ...

See also:

Components and Components Location
Components 1. Sub frame2. Coil spring3. Upper arm4. Assist arm5. Trailing arm6. Rear axle ...

Components and Components Location
Component Location 1. Slide motor2. Front height motor3. Rear height motor4. Lumbar support motor5. Recline motor6. Cushion extension motor7. Lumbar support switch ...

Knock Sensor (KS) Description and Operation
Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. The two Knock Sensor (KS) are installed inside the V-valley of the cylinder bl ...