Hyundai Azera: Cooling System

Cylinder Block Repair procedures

Disassembly     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion. ...

Coolant Repair procedures

Replacement And Air Bleeding     Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the radi ...

See also:

Output Speed Sensor Repair procedures
Inspection 1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. Removal 1. Remove the battery and the battery ...

In-car sensor Description and Operation
Description 1. In-car air temperature sensor is located at the lower crash pad. 2. The sensor contains a thermistor which measures the temperature of the cabin. The signal, determined by the ...

ENGINE START/STOP button position
OFF To turn off the engine (START/RUN position) or vehicle power (ON position), press the ENGINE START/STOP button with the shift lever in the P (Park) position. When you press the ENGINE START/S ...